| |
| Motor belongs to the inductive load, current hysteresis and voltage, most appliances are such. |
| 1, the door from the mounting plate 25mm2, 2.5mm thick, 20mm wide U curved on both sides of the edge, so that the mounting plate more strength, also facilitate
Carry.
2, the bottom three cable introduction cover, can replace each other, easy to move, easy lead-in cables, easy opening line.
3, the box door with a grounding bolt 5, bearing hinge easy installation, change the doors are easy. The door can be opened 130 degrees.
4, plastic sliding guide slide guide rail by using plastic, can from the front side of the cabinet will be installed plate into the cabinet rectangular frame 7, strong can not only strengthen the intensity of the front door, can also be used for fixed installation of electric components (with door installation bar use).
5, the backplane can be easily installed, fixed by screws; can also dress up the door.
6, the standard MS821, lock, three lock the door.
7, a sealing ring: polyurethane foam sealant, ensure the protection grade.
8, the door frame and door seal waterproof edge matching to prevent water and dust falling into the cabinet.
9, (a) to swap around door design, convenient use, standard 13 modular mounting hole design, convenient installation.
In 10, light, convenient installation and detection (since the option).
11, document bags, convenient field work (since the option).
12, the installation beam, does not use the mounting plate can also be installed inside the cabinet (since the option).
13, a draught fan and a filter screen, ensure the cabinet ventilation, protection grade IP54 (since the option).
14, the base, fixed, mobile, disassembly, installation is very convenient (since the option).
15, a mounting plate, installed capacity (since the option).
The installation of 16, door, convenient installation. | | | author: Published at: 2013/4/28 16:14:15 |  |
|
|
